How to Draw a Can of Soda

Contents

• 1 What Materials Do You Need?
• 2 Steps To Make A Soda Can Wind Spinner
  • • 2.0.1 Marking Lines:-
    • 2.0.2 Cutting:-
    • 2.0.3 Giving Shape:-
    • 2.0.4 Looping the wire
    • 2.0.5 Painting

What do you do every time you are done with a can of soda? Most people crush it and toss it into the dustbin. But, did you know that those empty soda cans could turn into the most beautiful DIY wind spinners to add to your home décor? Within an hour, you can make these beautiful crafts using a few simple tools.

Hang them from a tree on the lawn or the garden, or place them by the balcony to have a stunning view. We bet you won't ever think of disposing of soda cans.

Follow the instructions to let your creativity give shape to the empty cans.

What Materials Do You Need?

• Aluminum soda cans
• Wire
• Beads
• Scissors
• Knife
• Pliers
• Awl or electric drill
• Cloth
• Nail paint remover
• Paper
• Ruler
• Marker

Steps To Make A Soda Can Wind Spinner

Marking Lines:-

1. Take an aluminum soda can with as less design or print on the body as possible. The ones with a plain silvery body look better as a wind spinner.
2. Take a page that matches the height of the soda can and draw a series of triangles and inverted triangles along both edges. Follow the diagram below.

Cutting:-

1. With your scissors, cut off the triangles drawn on the page. If you follow the diagram above, you need to cut off the blue triangles on the page.
2. Place the paper on the soda can and use your marker to mark out the hollow triangles on the surface of the soda can.
3. Remove the paper and join the triangles from top to bottom in parallel lines using a ruler. Your can should roughly resemble the diagram below.
4. Use your knife to scratch deeply along the parallel lines marked on the can. Also, scratch the left sides of the triangles on top to achieve a series of diagonal cuts. Follow the following trajectory highlighted:

1. Scratch with as much pressure as you can give. Even if you do not cut through the aluminum surface completely, there isn't any harm.
2. Use a piece of cloth and nail polish remover to rub off the lines made by the marker.
3. Insert the knife through the top diagonal cut and run it through the straight line you just scratched. Repeat the same with all the parallel lines marked on the can to get thin strips of aluminum separated from the body and attached at the base.

Giving Shape:-

1. Use your plier to bend the diagonal cuts along the top and the base to pull out the middle part of the strips. Your can should now resemble the picture below.

1. You may also give the can a fan-like shape by cutting off the top with a knife or scissors and pulling out the thin strips cut till almost the bottom. Look at the picture below for reference.

Using your pliers, you may also twist the ends of the spokes to give it a spiral shape like the picture below.

1. Alternatively, you can use your pliers to fold the end of the one spoke slightly. Take another can cut to the same level and overlap the folded end of one spoke of the second can with the first one. Press the corners firmly with the plier and fold the corner to tighten the bond. Repeat the same with the next spokes of both the cans till all are joined.

Read More: How to Make Wind Chime Louder

Looping the wire

1. Using an awl or an electric drill, make two holes on the top and bottom end right through the center.
2. Run a wire through the holes from top to bottom.
3. Take two to three beads, run through the bottom end of the wire, and bend a loop at the end. Repeat the same process on the top end.
4. Your soda can wind spinner is ready to hang wherever you wish to place it. The best place to hang it is in a place where the wind is strong enough to spin the can frequently.

Painting

1. When everything has been done, you may paint the wind spinner in a color of your choice or in different colors to give it a bright and lively look. The plain silvery look of aluminum, too, looks beautiful when the can spin in the air.

Follow the videos to watch the process from scratch to completion.

So, next time you drink a can of soda, turn it into an artifact instead of adding up to the environmental waste. Hang your DIY wind spinner and let the wind do its job of providing you with a spectacular visual effect.

Morshadul is a professional cybersecurity expert, but he loves gardening, learning new things, experimenting, traveling, & helping people. Most of his free time spends on gardening beside his profession since 2010. Morshadul researched tremendous resources about indoor & outdoor gardening and garden decor and bought many tools and ornaments for his garden.

How to Draw a Can of Soda

Source: https://bestgardenz.com/make-a-soda-can-wind-spinner/

Share this post